Skip to content
Meta

Cloudflare POAS bidding: Meta Conversions API with profit

Send profit from your website's orders to Meta through the Meta Conversions API with Advanced Matching, and optimise on it with a ROAS goal.

Every website purchase goes to your Meta pixel through the Meta Conversions API, server-side, with its profit in the custom event PMOrderProfit. Optimise on a custom conversion on it and Meta steers on profit (POAS). Each event carries hashed customer data for Advanced Matching, so Meta can match it to the person who clicked.

Revenue is the value your purchase page reports.

Set it up with AI

Connect your assistant

First time? Add the Product Metrics MCP server to your assistant, then paste the prompt below.

In Claude, choose Add custom connector; in ChatGPT, Settings → Apps & Connectors. Paste this URL:

https://www.productmetrics.io/mcp

Claude Code: run this in your terminal.

claude mcp add --transport http product-metrics https://www.productmetrics.io/mcp

CodexAll clients and details →

Setting it up with AI takes one prompt and 60 seconds: paste it into your assistant.

Set up POAS bidding (bidding on profit) for my website (tracked with Cloudflare Tracking) in Meta with Product Metrics, and help me set the product cost fallback because my website sends no product costs. Check my setup status first, walk me through each open step, and give me the link when I need to click something.
Set up POAS bidding (bidding on profit) for my website (tracked with Cloudflare Tracking) in Meta with Product Metrics, and help me set the product cost fallback because my website sends no product costs. Check my setup status first, walk me through each open step, and give me the link when I need to click something.
Set up POAS bidding (bidding on profit) for my website (tracked with Cloudflare Tracking) in Meta with Product Metrics, and help me set the product cost fallback because my website sends no product costs. Use the Product Metrics MCP server, or the productmetrics CLI with --json and the Product Metrics skills if they are installed (run `productmetrics help agents` first), and tell me when a step needs me in a browser.
Set up POAS bidding (bidding on profit) for my website (tracked with Cloudflare Tracking) in Meta with Product Metrics, and help me set the product cost fallback because my website sends no product costs. Use the Product Metrics MCP server, or the productmetrics CLI with --json and the Product Metrics skills if they are installed (run `productmetrics help agents` first), and tell me when a step needs me in a browser.

Prerequisites

  • Editor or admin on the property in Product Metrics, with Pro (Full Signal Tracking).
  • Your website on Cloudflare Tracking: its domain on Cloudflare DNS with the record proxied (the orange cloud), a workspace admin who signs in to Cloudflare and approves Product Metrics (that is the whole setup), and the website linked to your property. See Any website (Cloudflare).
  • Access to your pixel in Meta Events Manager, to copy its ID and generate a Conversions API access token.

In the app

1. Connect your website and Meta

Connect your website with Any website (Cloudflare). Then, under Tracking → Meta Conversions API → Connect Meta, add your Pixel or Dataset ID and a Conversions API access token from Events Manager, and send a test event: Meta.

Connect your website, step by step:

Open Ecommerce platforms

Go to Integrations → Ecommerce platforms. Under Unlock server-side conversion tracking, select Connect on Cloudflare Tracking.

The Unlock server-side conversion tracking section: Cloudflare Tracking, Track every sale server-side on your own domain, with a Connect button.

Start the setup

The page lists three steps: add your website, link a property and connect Cloudflare. Select Connect Cloudflare Tracking.

The Cloudflare Tracking page under Integrations → Ecommerce platforms: 0 of 3 steps done, step 1 Add your website with the Connect Cloudflare Tracking button, then Link a property.

Enter your website domain

Enter the domain your customers visit and select Connect. One installation per hostname.

The Connect Cloudflare Tracking dialog, for any website using Cloudflare DNS: an empty Your website domain field and the Cancel and Connect buttons.

Then add the Meta destination:

Open Tracking

Go to Integrations → Tracking. Under Destinations, select Meta Conversions API.

Open the Meta panel

The panel lists the events Product Metrics sends and what you need: a Pixel or Dataset ID and a Conversions API access token from Events Manager. Select Connect Meta.

The Meta Conversions API panel, Not configured: Product Metrics sends AddToCart, InitiateCheckout and Purchase from the server to your Meta pixel, with hashed customer data when the shopper consented to marketing, plus revenue, profit, new and returning customer, and LTV events, which also need analytics consent. You need a Pixel or Dataset ID and a Conversions API access token from Events Manager. A Connect Meta button.

Add the Meta destination

Choose the store, enter the Pixel or Dataset ID and the Access token, and optionally a Test event code. Keep Send events to Meta on and select Add destination.

The Add Meta destination dialog for the example store Northwind Outfitters: empty Pixel or Dataset ID, Access token and Test event code (optional) fields, each with where to find it in Events Manager, the Send events to Meta switch on, and the Cancel and Add destination buttons.
Example data.

Create custom conversions in Meta

In Events Manager, create a custom conversion for each Product Metrics event you want to measure, using the event names listed in the panel.

The Set up custom conversions in Meta section of the Meta Conversions API panel: the steps in Events Manager, then a table of each conversion and its event: New customer revenue PMNewCustomer, New customer profit PMNewCustomerProfit, Returning customer revenue PMReturningCustomer, Returning customer profit PMReturningCustomerProfit and Order revenue PMOrderRevenue.

On Cloudflare Tracking, Product Metrics reads consent from the banner chosen under Tracking → Configure consent (OneTrust, Cookiebot, Usercentrics or Osano). The profit event also needs analytics consent. See Consent.

Open Tracking

Go to Integrations → Tracking. The checklist shows six steps: start by connecting your store, or use Cloudflare Tracking if you have no store platform.

Tracking in Product Metrics with the Complete your tracking setup checklist of six steps, starting with Connect your store.

Follow the next step

Once your store is connected and linked, the checklist opens the next open step. Each step says what it does.

The Complete your tracking setup checklist in Tracking: 3 of 6 essential steps completed, with Connect your store, Link the store to this property and Install storefront tracking ticked, and Configure consent open as step 4 with the consent platform still Not configured.

Configure consent

Under Configure consent, pick the cookie consent platform your storefront uses. The storefront script collects nothing until the visitor agrees.

The Consent management panel in Tracking: the storefront script collects nothing until your cookie banner says the visitor agreed, a Not configured status, and the Consent platform dropdown.

You should see: the gateway card says Gateway setup complete; Events Manager shows the test event under Test events.

2. Activate your additional costs

A website sends no product costs, so profit uses your Product cost fallback (%) of each line’s revenue. Set it to what your products cost you as a share of their price; profit is only as accurate as this number. Shipping, payment fees and the rest come from your additional costs.

Then, under Tracking → Add your additional costs, check the defaults for your country, set Product cost fallback (%) and select Activate additional costs: Costs.

Add your additional costs

Product costs come from your store where it reports them. Under Add your additional costs, add shipping, handling, returns and payment fees, set Product cost fallback (%) and select Activate additional costs, so the profit conversions carry real profit.

You should see: the Profit tracking section says your additional costs are active.

3. Create a custom conversion on PMOrderProfit

This step happens in Meta. PMOrderProfit only appears in Meta’s selector after Meta has received one, so first place a test order with consent accepted and your costs active.

  1. In Events Manager, choose Custom conversions → Create custom conversion.
  2. Select your pixel and the event PMOrderProfit.
  3. Add the event parameter rule pm_purpose equals ORDER_PROFIT.
  4. Choose Purchase as the category. Use the event’s value and currency; leave the fixed conversion value unset.

For ROAS, skip this: the standard Purchase event already carries revenue.

Once your test order arrived, remove the test event code, or events keep landing under Test events only.

You should see: the custom conversion shows in Events Manager.

4. Optimise on profit

In your sales campaign, choose the PMOrderProfit custom conversion as the conversion event, optimise for value and set a ROAS goal as a percentage: 100% is break-even, 150% keeps €0.50 profit per €1 of ad spend. For revenue (ROAS), use Purchase with your revenue target, for example 420% for a ROAS of 4.2.

Moving a campaign from revenue to profit? Lower the goal: POAS and ROAS bidding.

You should see: the ad set’s conversion event is your PMOrderProfit custom conversion.

5. Check it works

Open Tracking → Meta Conversions API: Check tracking works.

You should see: Access token: Saved, Sending: On with test mode off, and the delivery counts; your test order is received.

How it works on a website

On a websiteSent as
RevenueThe order’s revenuePurchase (and PMOrderRevenue, ORDER_REVENUE)
Product costsNone sent: your Product cost fallback (%) of each line’s revenueTaken off profit
Payment feesYour additional costsTaken off profit
Shipping, handling, returnsYour additional costsTaken off profit
ProfitRevenue ex tax − all costsPMOrderProfit (ORDER_PROFIT); 0 for a loss, signed value in pm_contribution_profit

Meta rejects events older than 7 days, so past orders are not imported.

Troubleshooting

ProblemFix
Orders arrive with revenue onlyA cost of the order is still unknown. Complete your costs under Profit tracking → Edit costs: an order is sent with profit only once every cost is known (profit rules).
Events only show under Test eventsRemove the test event code from your Meta destination under Tracking → Meta Conversions API.

FAQ

What Product cost fallback should I set?

What your products cost you as a share of their selling price, for example 40% when a €50 product costs you €20. Profit in PMOrderProfit is only as accurate as this number.

Do I still need my Meta pixel?

You can keep it. Purchase uses the order transaction ID, so Meta counts it once when your pixel and the Meta Conversions API both send it within 48 hours. The server-side events also carry hashed customer data for Advanced Matching.

Do ad blockers stop orders reaching Meta?

No. Full Signal Tracking gets through every adblocker, and auto-rotates its endpoint if it is ever blocked. PMOrderProfit still needs the visitor’s marketing and analytics consent.

Are past orders sent to Meta?

No. Meta rejects events older than 7 days, so Product Metrics sends orders from the moment tracking is live.

Where next

On the website: POAS, target ROAS, POAS calculator

Developers: do the same with the CLI or the API.